LU72M series blades are the best choice for production sizing of hard or soft wood up to 3-1/2 inches thick with a miter box. These general purpose blades feature legendary Freud quality and are designed for extra long life in industrial applications. Las
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.
Freud's bushings are manufactured to the highest precision to insure a cut equal to that of the cutter without the bushing.
Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its' blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30-degree Alternate Top Bevel with a 5-degree Face Hook on 10-inch diameters and smaller.
This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction. This blade leaves a smooth, velvety finish that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood, and delicate mouldingForrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The Solid-Surface Planer carbide-tipped saw blade is especially designed for: Avonite, Corian, Fountainhead, and other solid surface material where the "ultimate" smooth cut is desired. Specially engineered clearances on the carbide teeth totally eliminate chipping and side scoring. The Result... perfect joints that last for years. 50% to 300% Longer Life Between Sharpening - Reduced Yearly Sharpening Costs - Less Machine Downtime - Improved Labor Efficiency - Inventory Savings - Fewer Blades Required.
LU81M series blades from Freud are the perfect blades for fast sizing of thick or stacked chipboard up to 3-1/2 inches high and also work well for hard and soft woods and plywood where surface finish is less important than cut speed. The micrograin carbidForrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.
LU81M series blades from Freud are the perfect blades for fast sizing of thick or stacked chipboard up to 3-1/2 inches high and also work well for hard and soft woods and plywood where surface finish is less important than cut speed. The micrograin carbid
LU81M series blades from Freud are the perfect blades for fast sizing of thick or stacked chipboard up to 3-1/2 inches high and also work well for hard and soft woods and plywood where surface finish is less important than cut speed. The micrograin carbidForrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30 degree Alternate Top Bevel with a 5 degree Face Hook on 10-inch diameters and smaller.
 |
 |
About Freud Industrial Blades
Freuds industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming -- which prolongs the life of the blade.
About the TCG Laminate Cutting Saw Blade
This 10-inch, 80-tooth thin kerf laminate blade from Freud gives you ultra long life and excellent finish on both the top and bottom of laminates, melamines, and plywoods. This blade is specially formulated with thick, MicroGrain carbide teeth -- so it's great for underpowered benchtop saws or contractor saws that need full kerf stability. The triple Chip Grind-Tooth design has a negative hook angle for superior life in abrasive manmade materials, and the Perma-Shield permanent non-stick coating prevents heat build-up, gumming, and corrosion for long life. This blade's laser-cut body has anti-vibration and expansion slots to keep it running straight and true.
Applications
he LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine and veneered plywood -- with no scoring blades needed.
Warranty
This blade is covered by Freud's limited lifetime warranty.
Customer Review: Like a hot knife through butter
This blade cut through both melamine and MDF that I attached laminate to with ease, and left a very clean edge on both sides of the material. Tear-out was virtually non-existent. I generally buy only Freud blades because of their superior quality, and this blade is no exception.
Customer Review: Sharp saw blade for molding
This blade cut through with little or no tear-out on the back side of the wood. It was the perfect choice for use on crown molding, as it left such a clean cut when done.
saw blade Wikipedia
